Structures of bored piles: features of installation technology
Main Article Content
Abstract
Currently, pile foundations are often used in engineering practice. Among the modern types of piles used for foundation structures, the option of foundations made of bored piles is definitely popular. They are used for various types of structures: bridges as part of highways, urban ring roads or high-rise buildings. The main problem in these cases is related to a reliable assessment of the bearing capacity of the pile and the development of a cost-effective design solution for foundation structures.
The studies carried out in this direction confirm that the issue of determining the load-bearing capacity of piles remains relevant both at the stage of developing reliable design solutions and in the process of searching for an economically efficient option of the foundation constructions of buildings and structures.
Taking into account the design features of bored piles and their installation technology add certain difficulties to the analytical methods of determining the soil bearing capacity of a single pile.
The practice of using bored piles on construction sites followed by observation of deformations showed that the soil bearing capacity of the piles, determined by the analytical method of standards used at the stage of developing design solutions for foundations, is underestimated. Therefore, the total number of piles in the foundation needs to be optimized according to the results of further field tests. Geometric parameters of piles, such as length and diameter, in some cases can also be reduced at the stage of rationalization of the design solution of the pile foundation, based on the results of field tests. So, as a result, the underestimated value of the load-bearing capacity of bored piles causes an increase in the cost of construction materials, an increase in the cost of installing foundation structures and an increase in the cost of housing for the end consumer.
The problem of reliable assessment of the soil bearing capacity of piles remains a relevant issue at the moment, as evidenced by the practice of designing foundation structures.
The paper presents the results of the analysis of the structural features of bored piles, which are aimed at increasing their bearing capacity. Also, the paper examines the features of the technology of installing bored piles, which are determined by both the hydro-geological conditions of the construction site and the need to install the constructive features of the bored pile.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors are published in this journal, agree to the following conditions:
Authors reserve the right to authorship of their work and transfer the journal the right of the first publication of this work under the terms of the Creative Commons Attribution License, which allows other persons to freely distribute published work with mandatory reference to authors original work and the first publication of work in this journal.
The authors have the right to enter into independent additional agreements on the non-exclusive dissemination of the work in the form in which it was published by this journal (for example, to post work in the electronic repository of the institution or to publish as part of a monograph), provided that the reference to the first publication of the work in this journal is maintained.
The journal's policy allows and encourages the authors to place the manuscript of the work on the Internet (for example, in the institutions' storehouses or on personal websites), both for presenting this manuscript to the editorial office and during its editorial processing, as this contributes to the creation of productive scientific discussion and positively affects the efficiency and dynamics of citing the published work (see The Effect of Open Access).
References
Seregin N.G. Feasibility for the implementation of cement piles / N.G. Seregin // IOP Conf. Series: Materials Science and Engineering. 953 (2020). 012093. doi:10.1088/1757-899X/953/1/012093
Monteiro, F.F. Settlement of bored piles with expander body system in lateritic soils. / Monteiro, F.F., Cunha, R.P. da, Aguiar, M.F.P. de ., & Silva, C.M. // REM - International Engineering Journal, 2021. 74(3), 309–318. doi:10.1590/0370-44672020740057
Więcławski, Paweł. Polish experience in the assessment of pile bearing capacity and settlement of the pile foundation. /Paweł Więcławski// 2012. https://www.researchgate.net/publication/309810128_Polish_experience_in_the_assessment_of_pile_bearing_capacity_and_settlement_of_the_pile_foundation.
Du, Z. Design of Ram-Compacted Bearing Base Piling Foundations by Simple Numerical Modelling Approach and Artificial Intelligence Technique. /, Z. Du, M.A. Shahin & H.El Naggar // International Journal of Geosynthetics and Ground Engineering. 7, 41 (2021). https://doi.org/10.1007/s40891-021-00287-6
Виконання спеціальних геотехнічних ро-біт. Палі бурові: (EN 1536:2010, IDT). ДСТУ Б EN 1536:2015. – Київ: ДП «Укрархбудінформ»,. 2016. – VI, 116 с.
Основи та фундаменти споруд: Зміна №1 ДБН В.2.1-10-2009. – К.: Мінрегіонбуд України, 2011. – 55 с.
Allison Gaynor. Slurry displacement piles and methods // Pile Buck, 37, 5(2021), 112-134. https://pilebuck.com/slurry-displacement-piles-methods/
Terceros, M. A. and Massarsch, K.R. The use of the Expander Body with cast in situ piles in sandy soil. // DFI/EFFC International Conference on Piling and Deep Foundations, Stockholm, May 21 – 23, 2014, pp. 347-358. https://www.semanticscholar.org/paper/THE-USE-OF-THE-EXPANDER-BODY-WITH-CAST-IN-SITU-IN-Tercer-os/2c9f945209849c0022190a4d30f2eadf1268698b
Seregin N.G. (2020). Feasibility for the implementation of cement piles // IOP Conf. Series: Materials Science and Engineering. 953(2020). 012093. doi:10.1088/1757-899X/953/1/012093
Monteiro, F.F., Cunha, R.P. da ., Aguiar, M.F.P. de ., & Silva, C.M.. (2021). Settlement of bored piles with expander body system in lateritic soils. REM - International Engineering Journal, 74(3), 309–318. doi:10.1590/0370-44672020740057
Więcławski, Paweł. (2012). Polish experience in the assessment of pile bearing capacity and settlement of the pile foundation. https://www.researchgate.net/publication/309810128_Polish_experience_in_the_assessment_of_pile_bearing_capacity_and_settlement_of_the_pile_foundation.
Du, Z., Shahin, M.A. & El Naggar, H. (2021). Design of Ram-Compacted Bearing Base Piling Foundations by Simple Numerical Modelling Approach and Artificial Intelligence Technique. // International Journal of Geosynthetics and Ground Engineering. 7, 41 (2021). https://doi.org/10.1007/s40891-021-00287-6
Vykonannia spetsialnykh heotekhnichnykh robit. Pali burovi: (EN 1536:2010, IDT). DSTU B EN 1536:2015. [Execution of special geotechnical works. Drill piles]. – Kyiv: DP «Ukrarkhbudinform»,. 2016. – VI, 116 s. (in Ukrainian)
Osnovy ta fundamenty sporud: Zmina №1 DBN V.2.1-10-2009. [Bases and foundations of buildings: Change #1]. – K.: Minrehionbud Ukrainy, 2011. – 55 s. (in Ukrainian)
Allison Gaynor (2021) Slurry displacement piles and methods. Pile Buck, 37, 5(2021), 112-134. https://pilebuck.com/slurry-displacement-piles-methods/
Terceros, M. A. and Massarsch, K.R. (2014). The use of the Expander Body with cast in situ piles in sandy soil. // DFI/EFFC International Conference on Piling and Deep Foundations, Stockholm, May 21 – 23, 2014, pp. 347-358. https://www.semanticscholar.org/paper/THE-USE-OF-THE-EXPANDER-BODY-WITH-CAST-IN-SITU-IN-Tercer-os/2c9f945209849c0022190a4d30f2eadf1268698b